e 3 ds21220 rev. 8 - 2 1 of 3 gbj20005-gbj2010 www.diodes.com diodes incorporated features gbj20005 - gbj2010 20a glass passivated bridge rectifier gbj dim min max a 29.70 30.30 b 19.70 20.30 c 17.00 18.00 d 3.80 4.20 e 7.30 7.70 g 9.80 10.20 h 2.00 2.40 i 0.90 1.10 j 2.30 2.70 k 3.0 x 45 l 4.40 4.80 m 3.40 3.80 n 3.10 3.40 p 2.50 2.90 r 0.60 0.80 s 10.80 11.20 all dimensions in mm _ b c d ee g h k j i l m n p r s a characteristic symbol gbj 20005 gbj 2001 gbj 2002 gbj 2004 gbj 2006 gbj 2008 gbj 2010 unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 50 100 200 400 600 800 1000 v rms reverse voltage v r(rms) 35 70 140 280 420 560 700 v average forward rectified output current @ t c = 110c i o 20 a non-repetitive peak forward surge current, 8.3 ms single half-sine-wave superimposed on rated load i fsm 240 a forward voltage per element @ i f = 10a v fm 1.05 v peak reverse current @ t a = 25c at rated dc blocking voltage @ t c = 125c i r 10 500 a i 2 t rating for fusing (t < 8.3 ms) (note 1) i 2 t 240 a 2 s typical total capacitance per element (note 2) c t 60 pf typical thermal resistance junction to case (note 3) r jc 0.8 c/w operating and storage temperature range t j ,t stg -55 to +150 c case: gbj case material: molded plastic. ul flammability classification rating 94v-0 moisture sensitivity: level 1 per j-std-020c terminals: plated leads, solderable per mil-std-202, method 208 lead free plating (tin finish). polarity: molded on body mounting: through hole for #6 screw mounting torque: 5.0 in-lbs maximum marking: type number weight: 6.6 grams (approximate) mechanical data glass passivated die construction high case dielectric strength of 1500v rms low reverse leakage current surge overload rating to 240a peak ideal for printed circuit board applications ul listed under recognized component index, file number e94661 lead free finish/rohs compliant (note 4) single phase, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. maximum ratings and electrical characteristics @ t a = 25c unless otherwise specified notes: 1. non-repetitive, for t > 1ms and < 8.3 ms. 2. measured at 1.0 mhz and applied reverse voltage of 4.0v dc. 3. unit mounted on 300 x 300 x 1.6mm cu plate heat sink. 4. rohs revision 13.2.2003. glass and high temperature solder exemptions applied, see eu directive annex notes 5 and 7.
ds21220 rev. 8 - 2 2 of 3 gbj20005-gbj2010 www.diodes.com 0.01 0.1 1.0 10 0 0.4 0.8 1.2 1.6 2.0 v , instantaneous forward voltage (v) fi g .2 t y pical forward characteristics ( per element ) f i , instantaneous forward current (a) f 100 t=25c j 100 50 1 10 100 i , peak forward surge current (a) fsm number of cycles at 60 hz fi g . 3 maximum non-repetitive sur g e current 150 2 5 0 0 200 single half-sine-wave t=25c j 10 100 1 1 10 100 c , total capacitance (pf) t v , reverse voltage (v) fi g .4 t y pical total capacitance, per element r f=1mhz t=25c j 0.1 1.0 10 100 1000 0 20 40 60 80 100 percent of rated peak reverse voltage (%) fi g .5 t y pical reverse characteristics t=50c j t = 125c j t = 100c j t=25c j 0 5 25 50 75 100 125 150 i , average rectified current (a) o t , case temperature (c) fi g . 1 forward current deratin g curve c 10 15 20 2 5 without heatsink with heatsink resistive or inductive load
notes: 5. for packaging details, visit our website at http://www.diodes.com/datasheets/ap2008.pdf. ds21220 rev. 8 - 2 3 of 3 gbj20005-gbj2010 www.diodes.com ordering information device packaging shipping gbj20005-f gbj 15/tube gbj2001-f gbj 15/tube gbj2002-f gbj 15/tube gbj2004-f gbj 15/tube gbj2006-f gbj 15/tube GBJ2008-F gbj 15/tube gbj2010-f gbj 15/tube (note 5) important notice life support diodes incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes witho ut further notice to any product herein. diodes incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. the user of products in such applications shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on our website, harmless against all damages. diodes incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written appr oval of the president of diodes incorporated.
|
